Activate Purchased Add-Ons - epiphan Pearl-2 User Manual

Pearl-2 User Guide
If you have the base version of the firmware, you are able to upgrade your system at any time with the 4K
feature add-on through an online firmware add-on, which will update your Pearl-2 with all the 4K features.
You can find more details on the add-on, along with installation instructions and the add-on itself, at
www.epiphan.com/add-ons.
Activating your 4K add-on might not be necessary, depending on the version of Pearl-2 you
purchased. As the first Feature Add-on, the 4K add-on was included automatically in some
systems. If you purchased the full version of Pearl-2 or an early copy with firmware 4.0.0, the 4K
add-on was included with your purchase and is automatically activated, so in those cases no
action is required.

Activate purchased add-ons

Pearl-2 add-ons must be purchased, installed and activated before their features can be used. If you have
already purchased an add-on either on our site at
Pearl-2, follow these instructions to start using your add-on feature. If you have not purchased an add-on
that you wish to install, you may follow the process at
1. Navigate to the Firmware upgrade
2. Under Feature add-ons, click the button Install purchased add-ons.
If you have multiple add-ons available to install, this button applies to all of them simultaneously.
3. After clicking on Install purchased add-ons, a message box appears. Click OK to install the add-on,
and automatically restart Pearl-2. When Pearl-2 reboots, the Add-on feature is activated.
Activate purchased add-ons
epiphan.com/add-ons
Purchase and install
page to start the process.
or by purchasing the full version of
add-ons.
108