Advertisement
Available languages
Available languages
Troubleshooting
Caution:
Danger from electrical current. Pull out
mains power plug before any work is
carried out on electrical parts.
No water coming out at the nozzle
1. Fresh-water tank empty, fill it.
2. Check that the position of the coupling
of the spray and suction hose is
correct.
3. Nozzle blocked, clean it.
4. Suction filter in fresh water tank
blocked, clean it.
5. Spray pump defective, have it replaced
by a technical expert.
Spray emitted from one side only
1. Nozzle is partly blocked, clean it.
Insufficient suction power
1. Cover not on properly, put it on
properly
2. Seal on cover dirty, clean it.
3. Fluff strainer dirty, clean it.
4. Suction hose is blocked, check and
clean it.
Spray pump too loud
1. Fresh-water tank empty, fill it
Have all inspections and work carried
out on electrical parts done by a
technical expert. For more extensive
tasks contact customer service.
Technical data
puzzi 200 / puzzi 100
Voltage variants
115 V (1~50/60 Hz)
Power, blower motor
Suction turbine P
max
Suction turbine P
nominal
Air flow, max
Vacuum
Power, spray pump, puzzi 200
Spray pump
Spray pressure, max.
Spray quantity
Unit socket, puzzi 200
Power consumption, max.
Power, spray pump, puzzi 100
Spray pump
Spray pressure, max.
Spray quantity
Dimensions
Filling capacity, fresh water
Capacity, dirty water
Length
Width
Height
Weight, puzzi 200
Weight, puzzi 100
Sound level
Conforms to DIN EN 60704-2-1 68 dB(A)
Safety class
Mains cable
Length
Type
H 05 VV – F 2x1
Specifications subject to change without
prior notice.
English
1250
W
1100
W
54 l/sec.
22
kPa
2 x 40
W
0,2
MPa
2 l/min.
250
W
40
W
0,1
MPa
1 l/min.
10
l
9
l
665
mm
320
mm
435
mm
12.1
kg
10.3
kg
II
7.5
m
9
Advertisement
