Operational Safety; Product Safety - Endress+Hauser Oxymax COS61D Operating Instructions Manual

Basic safety instructions
2.4

Operational safety

1. Before commissioning the entire measuring point, verify that all connections are
correct. Ensure that electrical cables and hose connections are undamaged.
2. Do not operate damaged products, and safeguard them to ensure that they are not
operated inadvertently. Label the damaged product as defective.
3. If faults cannot be rectified:
Take the products out of operation and safeguard them to ensure that they are not
operated inadvertently.
NOTICE
Non-designated use
Incorrect measurements, malfunctions and even measuring point failure could result
‣
Only use the product in accordance with the product specifications.
‣
Pay particular attention to the technical data on the nameplate.
2.5

Product safety

The product is designed to meet state-of-the-art safety requirements, has been tested, and
left the factory in a condition in which it is safe to operate. The relevant regulations and
European standards have been observed.
6
Oxymax COS61D
Endress+Hauser