Residual Heat Indicators - CDA HC3616FR Installation, Use And Maintenance Manual

Residual Heat Indicators

The hob is equipped with residual heat indicators to warn when any of
the zones are still hot to the touch after use. An " " will show on the
relevant zone's indicator for some time after cooking.
The duration for which the residual heat indicators are displayed
for is determined by the power level last used and the subsequent
estimated cooling time. As a result of this, the residual heat indicator
may sometimes be shown even when the zone is no longer hot to the
touch.
Please note: In the event of a power cut or failure, the residual heat
indicators will illuminate after the power supply is restored. In the
event of the restoration of the power supply, or when the hob is first
installed and switched on, the residual heat indicators can show
for up to one hour. This does not affect the hob's operation and is
not indicative of a fault. When there is no power supply to the hob
however the residual heat indicators will not work, yet the hob zone(s)
may still be hot, so extra care must be taken.
Please remember: You should avoid touching any zone whilst the
hob is in use or whilst either residual heat indicator is displayed.
Only pans with contents should be on the zones during use and
you should not leave any objects on the zones after use.
10