Residual Heat Indicators; Efficient Use Of Your Hob - CDA HC9626FR Directions For Installation, Use And Maintenance

Table of Contents

Advertisement

Residual heat indicators

The hob is equipped with residual heat indicators to warn when any
of the zones are still hot to the touch after use. An " " will show in a
zone's indicator if the relevant zone is between 45°c and 60°c. An
" " will show if the relevant zone is 60°c or above. You should avoid
touching any zone whilst the hob is in use or whilst either residual
heat indicator is displayed.
Please note: In the event of a power cut or failure, the residual heat
indicators will illuminate after the power supply is restored. When
there is no power supply to the hob however the residual heat
indicators will not work, yet the hob zone(s) may still be hot, so extra
care must be taken.

Efficient use of your hob

The hob is equipped with zones designed to accommodate most
shapes and sizes of pan. For best results, only use pans with flat
bottoms. The most efficient use of the hob is shown below, where the
pan and zone are correctly chosen. Use pan lids where possible to
minimize the energy usage of your appliance.
Fig.3
14

Advertisement

Table of Contents
loading

Table of Contents