Multi-Bay Joining Kit; What's Included; Description - Black Box 525068 User Manual

ELITE SERIES DATA CABINETS

10. Multi-Bay Joining Kit

10.1 What's Included

• (4) Hex bolts
• (4) Nuts
• (4) Washers
• (4) Lockwashers

10.2 Description

The Multi-Bay Joining Kit consists of the above hardware, which is used to join together two Elite Series Data
Cabinets (see Figure 16). Use the kit when you need to install more equipment than will fit in just one cabinet.
1. From the inside of the first cabinet, install the hex bolts in the holes on the four corners of the cabinet.
2. Line up the holes on the second cabinet with the installed hex bolts on the first cabinet.
3. Push the hex bolts through the holes on the second cabinet.
4. Attach the washers and nuts or lockwashers to the bolts connecting the two cabinets.
5. Tighten the bolts.
18
Figure 16. Two cabinets attached via the Multi-Bay Joining Kit.