Performance server cabinets and accessories (17 pages)
Summary of Contents for Black Box Elite EC38U3036
Page 1
EC24U3032 EC38U3036 EC45U3036 EC24U2442 EC42U2442 EC45U2442 EC38U2432 EC42U3042 EC45U3042 EC38U2436 EC45U2436 EC45U3048 EC38U3032 EC45U3032 Elite Cabinet/Rack User’s Manual ™ Fully assembled, ready-to-use custom cabinets. You chose your options, then we built the cabinet you need. Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Customer FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Support...
Page 2
Trademarks Used in this Manual Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks, and Elite is a trademark, of BB Technologies, Inc. VELCRO is a registered trademark of Velcro Industries B.V. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Table of Contents Preface ......................................... 4 Safety Symbols Used in this Manual ................................4 Safety Considerations ....................................4 Installation ........................................5 Receiving, Unpacking, and Removing the Elite Cabinet/Rack from the Pallet ....................5 Service .......................................... 5 Specifications ...................................... 6 Overview ......................................11 2.1 Introduction ....................................11 2.2 Features .....................................11 2.3 What’s Included ..................................11...
Preface/Safety Symbols Used in this Manual/Safety Considerations Preface This manual is provided to prevent service personnel from committing an act that results in the risk of fire, electric shock, or injury to persons. Only trained service personnel should receive, unpack, and assemble the Elite Cabinet/Rack. In addition, only trained service personnel should install equipment in the rack.
Elite Cabinet/Rack and load the lighter units at the top. Service The Elite Cabinet/Rack should only be repaired by personnel trained by Black Box, or returned to Black Box for repair. Contact Black Box Technical Support at 724-746-5500 or go to blackbox.com and click on “Talk to Black Box.”...
Chapter 1: Specifications 1. Specifications Table 1-1 lists specifications for the cabinet shown in Figures 1-1 through 1-4. Table 1-1. Cabinet specifications. Rear Bottom Frame Part Height Overall Height* Width Depth RU Rail (Min.–Max.) Side Panel Side Panel Cable Access Top Corner Number Prefix Depth...
The cabinets are available in four overall heights, and 10 overall frame sizes. See Table 2-1. 2.3 What’s Included Your package should include the following items. If anything is missing or damaged, please contact Black Box Technical Support at 724-746-5500.
Page 12
Chapter 2: Overview Table 2-1. Elite Cabinet Size Options EC24U3032 ................................... 24U (48"H x 30"W x 32"D) EC24U2442 ....................................24U (48"H x 24"W x 42"D) EC38U2432 ................................... 38U (72"H x 24"w x 32"D) EC38U2436 ....................................38U (72"H x 24"W x 36"D) EC38U3032 ....................................38U (72"H x 30"W x 32"D) EC38U3036 ...................................
Page 13
Chapter 2: Overview Table 2-3. Front Door or Rear Door............................................None ..........................................Fan Door ............................................Plexi ............................................Solid ..........................................Split Mesh ............................................Mesh Solid door Fan door Plexi door Mesh door Split mesh door Figure 2-3. Door options. EC24U3032 877-877-2269 | blackbox.com Page 13...
Chapter 2: Overview Table 2-7. Lock Type............................................Keyed ..........................................Combination ............................................None ..........................................Biometric 2.5 Optional Accessories This section lists optional accessories not included in the cabinet’s base part number. (These optional accessories must be ordered separately, and are not discussed in detail in this manual, since they have their own manual that ships with the accessory.) Bottom Panels and Filter Kits Optional handles: Solid Bottom Panel...
Chapter 3: Changing the Cabinet’s Configuration 3. Changing the Cabinet’s Configuration 3.1 Casters and Leveling Legs CAUTION: To install casters or levelers, you must tip the enclosure onto its side. The enclosure is very heavy, so you may need several people to lay it on its side. Do not lay the enclosure on its front or back. This may damage the door and hinges.
Chapter 3: Changing the Cabinet’s Configuration 3.2 Door Handle Operation The Elite enclosure ships with its front and rear doors unlocked, and includes two keys. Figure 3-2. Door handle drawings. 3.3 Removing or Changing the Doors 3.3.1 Removing or Installing a Door Open the door beyond 90°, then grasp the door with both hands and carefully lift it upward.
3.3.2 Reversing a Door The front and rear doors are installed with a right-hand hinge as standard from Black Box. Removing the hinges enables you to reverse the door by flipping them over and reinstalling the hinges using the universal mounting holes. All the enclosure frames and doors can be hinged right- or left-hand.
Chapter 3: Changing the Cabinet’s Configuration 3.4 Removing or Installing a Side Panel The side panels connect to the enclosure frame with two quick-release latches and a keyed lock. To remove the side panel, unlock the panel and press the quick-release latches down and release them. Then tilt the top of the side panel out slightly and lift the side panel up a couple of inches until it is free.
3.5 Top Panel and Mounting Options The top panel of the enclosure is installed at Black Box. To remove the top panel, remove the four #10-32 x 1" large Phillips pan- head screws. Then simply lift the top panel up and off. There are six versions of top panels (solid, perforated, 1-fan, 2-fan, 3-fan, 6-fan).
Chapter 3: Changing the Cabinet’s Configuration 3.6 Adjusting the Rails Mounting Rails The vertical mounting rails are installed with all standard frames. You can configure the 30" wide enclosure to 23" EIA mounting with an optional bracket set. Extra sets of both square hole rails (M6) and tapped #10-32 rails are available as accessories. (See page 15).
Chapter Chapter 3: Changing the Cabinet’s Configuration 3.8 Power Strip Mounting These universal power strip brackets enable you to mount a power distribution unit (PDU) with button mounting as shown in Figure 3-10. 1. Measure the required mounting distance top to bottom. 2.
Chapter 3: Changing the Cabinet’s Configuration 3.9 Baying Kit Use the kit components shown in Figure 3-11 to link two cabinets together. Split lock Flat washer washer ⁄ " thumbscrew ⁄ " wing nut Figure 3-11. Baying kit components. EC24U3032 877-877-2269 | blackbox.com Page 27...
Page 28
Protective Grounding Protective Grounding Protective grounding studs are provided along with grounding jumper wires that electrically bond the Elite Cabinet doors to one of the Elite Cabinet sides. WARNING: To avoid injury to persons or loss of life, ground each Elite Cabinet individually to the dedicated branch circuit ground.
Page 32
About Black Box Black Box Network Services is your source for an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 60 seconds or less.