Performance server cabinets and accessories (17 pages)
Summary of Contents for Black Box EC24U3032
Page 1
EC24U3032 EC42U3042 EC45U2442 EC24U2442 EC45U2436 EC45U3042 EC38U3032 EC45U3032 EC45U3048 EC42U2442 EC45U3036 Elite Cabinet/Rack User’s Manual ™ Fully assembled, ready-to-use custom cabinets. You chose your options, then we built the cabinet you need. Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Page 2
Trademarks Used in this Manual Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks, and Elite is a trademark, of BB Technologies, Inc. VELCRO is a registered trademark of Velcro Industries B.V. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
National Electric Code ANSI/NFPA 70-1999. The ambient temperature operating range for the Elite Cabinet/Rack and accessories is +50 to +95° F (+10 to +35° C). The non-operating temperature is -4 to +140° F (-20 to +60° C). EC24U3032 724-746-5500 | blackbox.com Page 4...
Elite Cabinet/Rack and load the lighter units at the top. Service The Elite Cabinet/Rack should only be repaired by personnel trained by Black Box, or returned to Black Box for repair. Contact Black Box Technical Support at 724-746-5500 or go to blackbox.com and click on “Talk to Black Box.”...
The cabinets are available in four overall heights, and 10 overall frame sizes. See Table 2-1. 2.3 What’s Included Your package should include the following items. If anything is missing or damaged, please contact Black Box Technical Support at 724-746-5500.
Page 12
Chapter 2: Overview Table 2-1. Elite Cabinet Size Options EC24U3032 ................................... 24U (48"H x 30"W x 32"D) EC24U2442 ....................................24U (48"H x 24"W x 42"D) EC38U3032 ....................................38U (72"H x 30"W x 32"D) EC42U2442 ....................................42U (79"H x 24"W x 42"D) EC42U3042 ....................................42U (79"H x 30"W x 42"D) EC45U2436 ....................................45U (84"H x 24"W x 36"D)
Page 13
Chapter 2: Overview Table 2-3. Front Door or Rear Door............................................None ..........................................Fan Door ............................................Plexi ............................................Solid ..........................................Split Mesh ............................................Mesh Solid door Fan door Plexi door Mesh door Split mesh door Figure 2-3. Door options. EC24U3032 Page 13...
"-13 threaded holes found at the corners of the enclosure. 3. Using a ⁄ " open-end wrench, tighten the levelers to the desired position. 4. Repeat Steps 2 and 3 for the remaining levelers. EC24U3032 724-746-5500 | blackbox.com Page 20...
To attach the door, align all three door hinges to their respective hinge pins on the enclosure and slowly slide the door down until seated. Open door beyond 90 degrees then lift off straight Figure 3-3. Removing or installing a door. Page 21 EC24U3032...
3.3.2 Reversing a Door The front and rear doors are installed with a right-hand hinge as standard from Black Box. Removing the hinges enables you to reverse the door by flipping them over and reinstalling the hinges using the universal mounting holes. All the enclosure frames and doors can be hinged right- or left-hand.
Tilt and lift the side panel Press quick release latches down and release Figure 3-6. Removing or installing a side panel (30" wide cabinet shown). Page 23 EC24U3032 724-746-5500 | blackbox.com...
3.5 Top Panel and Mounting Options The top panel of the enclosure is installed at Black Box. To remove the top panel, remove the four #10-32 x 1" large Phillips pan- head screws. Then simply lift the top panel up and off. There are six versions of top panels (solid, perforated, 1-fan, 2-fan, 3-fan, 6-fan).
Figure 3-8. Rackmount units (RU) are marked on rails for easy equipment mounting. Round cable passthrough and vertical and horizontal cable tie-down slots are provided on side of rails. 3.7 Bottom Panel Figure 3-9 shows the cabinet’s bottom panel. Figure 3-9. Bottom panel. EC24U3032 Page 25...
Figure 3-10. 1. Measure the required mounting distance top to bottom. 2. Install the brackets. 3. Install the power strip. Outer frame Cabinet of Cabinet Power strip mounting bracket Figure 3-10. Mounting a power strip. EC24U3032 724-746-5500 | blackbox.com Page 26...
Chapter 3: Changing the Cabinet’s Configuration 3.9 Baying Kit Use the kit components shown in Figure 3-11 to link two cabinets together. Split lock Flat washer washer ⁄ " thumbscrew ⁄ " wing nut Figure 3-11. Baying kit components. EC24U3032 Page 27...
Page 28
The following parts are not effectively bonded to the protective earthing terminal: rails and front to back rail horizontals. If these parts need to be bonded to the protective earthing terminal, do so in accordance with Article 250 or the National Electric Code. EC24U3032 724-746-5500 | blackbox.com...
Page 32
About Black Box Black Box Network Services is your source for an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 60 seconds or less.