ELITE SERIES DATA CABINETS
7. Adjusting the Mounting Rails
Your Elite Series Data Cabinet is shipped ready to use in the 19" rackmount position.
NOTE
The same rails can be used in the 19", 23", or 24" rackmount position.
5
5
1
Mounting rails are provided with a standard
⁄
"
⁄
"
⁄
" EIA hole pattern and the holes are tapped for 10-32
8
8
2
hardware (Figure 9). M6 rails (with square holes) are also available (RM405, RM406, RM407). They mount in
the same way as the regular rails.
For ease of panel and equipment alignment from rail to rail, arrows are stamped every 5.25" or every three
1.75" rack units on the face of each rail (Figure 9).
10-32 equipment mounting hardware is provided in the standard accessory kit that is packaged inside your
cabinet.
Figure 9. The mounting rails.
12