Related Manuals for Black Box RM2000A
Summary of Contents for Black Box RM2000A
- Page 1 © Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746...
- Page 2 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 SUPPORT Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 INFORMATION Web site: www.blackbox.com • E-mail: info@blackbox.com...
- Page 4 TRADEMARKS USED IN THIS MANUAL TRADEMARKS USED IN THIS MANUAL Any trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
-
Page 5: Table Of Contents
1. Specifications ............... 3 Performance Server Cabinets (RM2000A–RM2080A) ....... . . 3 Tool-Less Shelf (RM2010) . -
Page 6: Specifications
RM2080A: 35.5" (90.2 cm) Side Walls: RM2000A, RM2030A, RM2050A, RM2070A: No; RM2020A, RM2040A, RM2060A, RM2080A: Yes Weight: RM2000A, RM2050A: 220 lb. (99.8 kg); RM2020A, RM2060A: 300 lb. (136.1 kg); RM2030A, RM2070A: 260 lb. (117.9 kg); RM2040A, RM2080A: 340 lb. (154.2 kg) 1.2 Tool-Less Shelf (RM2010) -
Page 7: Performance Server Cabinets
They contain standard 19" front and rear server-type rails with standard installation-hole spacing. The RM2000A, RM2020A, RM2030A, and RM2040A have fully perforated front and rear mesh doors for airflow. The RM2050A, RM2060A, RM2070A, and RM2080A have a polycarbonate front door with a peripheral perforation around it to allow for airflow and a fully perforated rear mesh door for airflow. - Page 8 To open the cabinet’s doors, first slide the upper part of the handle (the plastic shield with the Black Box logo on it) upward to expose the button. If the cabinet is unlocked, press the button; the lower part of the handle will pop out so it can be grasped.
-
Page 9: Tool-Less Shelf (Rm2010)
PERFORMANCE SERVER CABINETS AND ACCESSORIES 3. Tool-Less Shelf (RM2010) Figure 3-1. Tool-Less Shelf. The Tool-Less Shelf for Performance Server Cabinets supports equipment weighing up to 150 lb. (68 kg). Its support surface measures 17.3"W x 23.6"D (43.9 x 59.9 cm), and its rear mounting arms extend to give the shelf a total front-rail-to-rear-rail depth of up to 35.5"... - Page 10 CHAPTER 3: Tool-Less Shelf (RM2010) 2. Straighten the shelf back to horizontal as you move it farther into the cabinet enclosure. Figure 3-3. Straightening the shelf to horizontal. 3. Insert the shelf’s front mounting tabs in the cabinet’s front rails, making sure that the shelf is level from side to side.
- Page 11 PERFORMANCE SERVER CABINETS AND ACCESSORIES 5. Insert the shelf’s rear mounting tabs, making sure that the shelf is level from front to back. Release all of its locking pins. Figure 3-6. Inserting the shelf’s rear mounting tabs. This completes the installation. Here’s what the shelf should look like when you’ve finished installing it. Figure 3-7.
- Page 12 CHAPTER 3: Tool-Less Shelf (RM2010) Figure 3-8. Rear view of a completed installation.
-
Page 13: 0-Cfm Fan Tray (Rm2011)
PERFORMANCE SERVER CABINETS AND ACCESSORIES 4. 440-CFM Fan Tray (RM2011) The 440-CFM Fan Tray for Performance Server Cabinets is made of 16-gauge cold-rolled steel and measures 19.8"H x 19.5"W x 2.6"D (50.3 x 49.5 x 6.6 cm). It provides redundancy with two fans, each measuring 6" (15.2 cm) in diameter. -
Page 14: Roof-Mounted Fan Tray (Rm2012)
CHAPTER 5: Roof-Mounted Fan Tray (RM2012) 5. Roof-Mounted Fan Tray (RM2012) The Roof-Mounted Fan Tray for Performance Server Cabinets is made of 1.5-mm/16-gauge steel and measures 2.4"H x 20.1"W x 6"D (6.1 x 51.1 x 15.2 cm). It provides redundancy and even airflow with three axial fans, each measuring 4.7"... -
Page 15: Interconnect Hardware (Rm2015)
Use these to bind a pair of Performance Server Cabinets together. Do not use this hardware if the joined cabinets will be lifted or transported while loaded, particularly if the combined load in the cabinets will equal or exceed 500 lb. (226.8 kg); instead, call Black Box Technical Support for a quote on more robust mounting hardware. - Page 16 CHAPTER 6: Interconnect Hardware (RM2015) Ovals show notch locations Figure 6-2. Using the Interconnect Hardware to join a pair of Performance Server Cabinets together.
-
Page 17: Cage Nuts (Rm488)
PERFORMANCE SERVER CABINETS AND ACCESSORIES 7. Cage Nuts (RM488) Use cage nuts and screws to rackmount standard devices such as hubs, routers, and switches.