Canon G2000 series Online Manual page 301

If you are using Windows XP
1. Install the printer driver on the client systems
For installation instructions, see
Note
• You must manually select the connection destination on the client computer.
During installation, click Cancel in the Connect Cable window. When the confirmation
message appears, click Yes.
In the Installation Incomplete window, select the Select printer port check box, click Manual
Selection, and then select the appropriate port.
2. Start the wizard
Select the start menu -> Control Panel -> Printers and Other Hardware -> Printers and Faxes ->
Add a printer.
When Welcome to the Add Printer Wizard screen appears, click Next.
3. Add a printer
Select A network printer, or a printer attached to another computer, then click Next.
On the Specify a Printer window, click Next and then search for the print server system.
Click the icon for the printer that you have configured on the print server system to be shared, and
then click Next.
Note
• If the icon for the printer is not displayed, check that the printer is actually connected to the print
server.
4. Complete the setup
Take the appropriate action as described on the screen and then click Finish.
The icon for the shared printer will be created in the Printers and Faxes window.
The setup on the client systems is complete. You can now share the printer in the network.
"Installing the MP Drivers."
301