Canon G2000 series Online Manual page 275

Initial Check Items (Nozzle Check)
Before running Nozzle Check, check that the printer power is on.
Then check the following item:
• Is there ink remaining?
Remaining Ink Notification Settings dialog box
When you click Remaining Ink Notification Settings, the Remaining Ink Notification Settings dialog
box appears.
Then from the print driver, you can switch the remaining ink level notification setting and reset the
remaining ink level count.
Function for Notifying the Remaining Ink Level
Select the setting for the remaining ink level notification function.
Select Enable to display an error message when the remaining ink level runs low.
Select Disable to prevent the error message from being displayed.
Then click Set to enable the selected setting.
Important
• Before enabling Function for Notifying the Remaining Ink Level,
upper limit line and reset the remaining ink level count by running Resets the Remaining Ink
Level Count. However, if you reset the count by operating the operation panel of the printer, the
setting in the printer driver is unnecessary.
• If you disable Function for Notifying the Remaining Ink Level, you must visually check the
remaining ink level. Replenish the ink before the ink level falls below the lower limit line.
Resets the Remaining Ink Level Count
Click Reset to reset the remaining ink level count.
Important
• When you reset the remaining ink level count, you must replenish all inks to the upper limit line.
Auto Power Settings dialog box
When you click Auto Power, the Auto Power Settings dialog box is displayed.
This dialog box allows you to manage the printer power from the printer driver.
Auto Power On
Selects the auto power-on setting.
Specify Disable to prevent the printer from turning on automatically when print data is sent to it.
Make sure the printer is on and then click OK to change the printer settings.
Specify Enable to turn the printer on automatically when print data is sent to it.
Auto Power Off
Selects the auto power-off setting.
If a printer driver operation or a printer operation is not performed within the specified time, the printer
turns off.
275
replenish all inks to the