Cut the window sash seal to the proper length.
Peel off the backing and attach the Foam-PE
to the underside of the window sash and
bottom of window frame
4a. Make sure the pins on the bottom frame
guide are facing the back of the unit.(Fig.4-1)
4b. Align both pins to the slotted areas under
the cabinet.(Fig.4-2,Fig.4-3)
4c. Push upward fully to insert pins into slotted
areas and secure frame guide.(Fig.4-4)
Front
Fig.4-1
Front
Close-up View
Fig.4-2
Fig.4-3
Front
Fig.4-4