Silvercrest SLS 2200 B1 User Manual And Service Information page 14

SilverCrest SLS 2200 B1
Option II
Option II can be used to mount the Solar Power Bank behind a window. Fix
the four suctions pads (D) to the holder (C) as shown in the diagram below.
Insert the suction pads (D) into the hole. Next, fix the suction pads (D) by
sliding them into the smaller hole. Next mount the holder (C) to the bottom of
the Solar Power Bank. To do so, insert the holding notches into the
corresponding holes on the back of the device.
You can now mount the Solar Power Bank behind a window using the suction
pads.
The surface should be free of dust, oil and grease for the
suction pads to stick well.
12 - English