Inspection, Maintenance, And Cleaning - Pacific hydrostar 95672 Set Up And Operating Instructions Manual

InSPEcTIOn, MAInTEnAncE, AnD cLEAnIng

WARnIng! Make sure that 1) the Trigger is locked in its off position, 2) the
1.
Power Switch of the Pressure Washer is in its "OFF" position, 3) the plug is unplugged
from its electrical outlet, 4) that the water supply is shut off, and 5) all residual wa-
ter pressure is safely expelled before performing any inspection, maintenance, or
cleaning procedures. Point the Lance Gun (1) in a safe direction and discharge
all remaining pressure. Then, disconnect the Heavy Duty hose from the unit.
Before each use, inspect the general condition of the Pressure Washer. Check
2.
for loose screws, misalignment or binding of moving parts, damaged electrical wir-
ing, damaged High Pressure Hose, damaged accessories, and any other condition
that may affect its safe operation. If abnormal noise or vibration occurs, have the
problem corrected before further use.
Do not use damaged equipment.
To clean, remove excess water from the Pump by tipping the unit on both sides
.
to drain any remaining water from the inlet and outlet fittings. Drain the Detergent
Dispenser and flush with running water. Use only a clean cloth and mild detergent
to clean the body of the Pressure Washer. Do not use solvents. Remove the Inlet
Filter and run water through it backwards to remove any debris.
Do not immerse any part of the tool in liquid. Dry off any remaining water on all
parts and fittings. Then engage the Trigger Safety Lock.
Use a Wire Tip Cleaner (not included) to help remove mineral deposits from the
nozzle. The more minerals that are dissolved in the water (the harder the water)
you use, the more often mineral buildup will need to be cleaned out from inside the
nozzle.
4. STORAgE: When storing, always completely empty the Pressure Washer of water.
Frost will damage the Pressure Washer if the unit contains water. Store the Pressure
Washer indoors in a dry, frost-free room. Minerals in the water can harden inside
the workings. Flush the unit with automotive antifreeze prior to long-term storage.
Always dispose of antifreeze in accord with local ordinances.
PLEASE READ THE FOLLOWIng cAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND DIAGRAM IN THIS MANUAL AS A
REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY
OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR
SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS
OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
For technical questions, please call 1-800-444-3353;
SKU 95672
Troubleshooting section at end of manual.
PAGE 16