Maytag MDE25PN Installation Instructions Manual page 22

ELECTRONIC CONTROL SETUP INSTRUCTIONS
OPTIONS 3.XX – 9.XX TO USE IF SPECIAL PRICING
IS SELECTED (CONT.)
Code Explanation
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7. 00 This is the start hour, 0–23 hours.
• Select START HOUR by pressing the WHITES
AND COLORS button.
• Press the PERM. PRESS button once to advance
to next code.
SPECIAL PRICE STOP HOUR
8. 00
NOTE: Uses military time or 24 hr. clock.
8. 00 This is the stop hour, 0–23 hours.
• Select STOP HOUR by pressing the WHITES
AND COLORS button.
• Press the PERM. PRESS button once to advance
to next code.
SPECIAL PRICE DAY
9. 10
9. 10 This represents the day of the week and
whether special pricing is selected for that day.
A number followed by "0" indicates no selection
that particular day (9. 10). A number followed
by an "S" indicates selected for that day (9. 1S).
Days of the week (1–7) are selected by pressing
the WHITES AND COLORS button. Press the
DELICATES button once to select special pricing
for each day chosen.
When exiting set-up code "9.," the display must show the
current day of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
• Press the PERM. PRESS button once to advance
to next code.
VAULT VIEWING OPTION
A. 00
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
A. 00 Not Selected "OFF."
A. SC Selected "ON."
• Press the DELICATES button once to change
this selection. When selected, the money and/or
cycle counts will be viewable (if counter option(s)
is selected) when the coin box is removed.
• Press the PERM. PRESS button once to advance
to next code.
22
Code
b. 05
b. 05
C. 20
C. 20
C. 05
d. 00
CODE (selected)
d. 00
d. CS
1S
2S
3S
4S
5S
6S
7S
E. 00
E. 00
E. AC
Explanation
VALUE OF COIN 1
This represents the value of coin 1 in the quantity
of 5% increments of the larger coin value.
5 x 5% = 25%.
• By pressing the WHITES AND COLORS button,
there is an option of 1–199 for the quantity
of 5% increments. With coin slide activation,
this represents the total vend price.
• Press the PERM. PRESS button once to advance
to next code.
VALUE OF COIN 2
This represents the value of coin 2 in the quantity
of 5% increments of the larger coin value.
20 x 5% = 100%.
By pressing the WHITES AND COLORS button,
there is the option of 1–199 for the quantity of 5%
increments.
PN MODELS: This represents the value of coin 2
in the quantity of 5% increments of the larger coin
value. Factory default = 5 x 5% of the larger coin
value.
PN MODELS USING ENHANCED DEBIT: This
represents the value of top off in quantity of 5%
increments of the larger coin value. Factory default
= 5 x 5% of the larger coin value.
• Press the PERM. PRESS button once to advance
to next code.
COIN SLIDE OPTION
This option is either NOT SELECTED "OFF" or
SELECTED "ON." Replacement of metercase will
be needed for coin slide mounting.
Not Selected "OFF."
Selected "ON."
NOTE: This option needs to be set to "00" unless
the metercase has been changed to accept a coin
slide device.
• Press the DELICATES button 3 consecutive
times for this selection. When coin slide mode is
selected, set "b." equal to value of slide in coins.
Set "6 xx" (REGULAR CYCLE PRICE) and "3.xx"
(SPECIAL CYCLE PRICE) to number of slide
operations. 6 01 and 3. 01 = 1 slide push.
NOTE: If the installer sets up "CS" on a coin drop
model, it will not register coins.
• Press the PERM. PRESS button once to advance
to next code.
ADD COINS OPTION
This option is either NOT SELECTED "OFF" or
SELECTED "ON." This option causes the customer
display to show the number of coins (coin 1) to
enter, rather than the amount.
Not Selected "OFF."
Selected "ON."
• Press the DELICATES button 3 consecutive times
to change this selection.
PN MODELS: This option is not selectable.
• Press the PERM. PRESS button once to advance
to next code.