Maytag MDE25PN Installation Instructions Manual page 21

Commercial he dryer electric
Hide thumbs Also See for MDE25PN:
Table of Contents

Advertisement

Available languages

Available languages

Code
Explanation
1. 00
MONEY COUNTER OPTION
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
1. 00
Not Selected "OFF."
1. 0C
Selected "ON."
• Press the DELICATES button 3 consecutive
times to select "ON" and 3 consecutive times
to deselect (Not Selected "OFF"). Counter resets
by going from "OFF" to "ON."
1. C0
Selected "ON" and not able to be deselected.
• To select "ON" and not able to be deselected,
first select "ON"; then within 2 seconds, press
the DELICATES button twice, the WHITES AND
COLORS button once, and exit set-up mode.
• Press the PERM. PRESS button once to advance
to next code.
SPECIAL PRICING OPTIONS
2. 00
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
2. 00
Not Selected "OFF."
2. SP
Selected "ON."
• Press the DELICATES button once to change this
selection.
If SPECIAL PRICING OPTION is selected, there is access
to codes "3.XX" through "9.XX."
• Press the PERM. PRESS button once to advance
to next code.
If money counter (1.0C or 1.C0) is selected, the following
is true:
3 00
Currency amount
in HUNDREDS
4 00
Currency amount
in ONES
5 00
Currency amount
in HUNDREDTHS
ELECTRONIC CONTROL SETUP INSTRUCTIONS
3 01 = 100.00
4 68 = 68.00
5 75 = 00.75
TOTAL = 168.75
OPTIONS 3.XX – 9.XX TO USE IF SPECIAL PRICING
IS SELECTED
Code
Explanation
3. 06
SPECIAL CYCLE PRICE
3. 06
Represents the number of coins (coin 1)
to start the dryer; may adjust from 0–39.
(See b.xx set up for VALUE OF COIN 1.)
• Advance from 0–39 by pressing the
WHITES AND COLORS button. Factory default
of 6 x coin 1.
PN MODELS ONLY: Factory default of 0 coins.
3. 00
• Press the PERM. PRESS button once to advance
to next code.
SPECIAL DRY TIME
4. 05
4. 05
PD MODELS: Represents the number of minutes
per coin (coin 1).
• Factory default of 5 minutes per coin.
Example: 6 coins x 5 minutes = 30 minutes.
• By pressing the WHITES AND COLORS button,
the value can be adjusted from 1–99 minutes.
4. 45
PN MODELS: Represents the cycle length for free
cycles. Example: "4 45" = 45 minutes.
• Press the PERM. PRESS button once to advance
to next code.
5. 00
TIME-OF-DAY CLOCK, MINUTES
5. 00
This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the WHITES AND
COLORS button.
• Press the PERM. PRESS button once to advance
to next code.
6. 00
TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24 hr. clock.
6. 00
This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the WHITES AND
COLORS button.
• Press the PERM. PRESS button once to advance
to next code.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mde25pd

Table of Contents