Creating A Preset - Swann pro-series hd Instruction Manual

Creating a Preset

12-09-2016 Fri 09:30:15
1
1.
Use the PTZ controls to move the camera to the desired focal position. The
zoom and focus controls can also be used. You can use the speed control to
determine how fast or slow the camera will move.
2.
Each preset position must be assigned a different number. Click the "Pre-
set" dialogue box as illustrated, input a number then click "Enter". You may
want to make note which preset position is assigned to each number.
3.
Click the "Set" button to save. Repeat these steps to create multiple preset
positions.
Clear:
Click this button to delete a preset position.
Clear All:
Click this button to delete all preset positions.
PTZ:
Click this button to access the full PTZ controls available. To access the
preset positions, click the "General" tab (as shown above right). Input a pre-
set number (click the dialogue box) then click "Call Preset". The camera will
Click for contents
2
3
Camera 02
move to the preset position assigned to that number.
Click the "X" button to close the PTZ controls when finished.
28