Camera: Video Tampering - Swann pro-series hd Instruction Manual

Camera: Video Tampering

Any security system can
be vulnerable to attack
or image failure. This
function can be used in
scenarios where some-
one may cover up the
camera's field of view or
if they are attempting to
disable or tamper with
the video signal.
Camera:
Select a camera that you would like to edit.
Enable Video Tampering Detection:
Settings:
Here you can define what will happen when the camera you've se-
lected is being tampered with:
Arming Schedule: Adjust your arming schedule by selecting a start day and a
time period (24-hour time). Click the "Copy" button to apply all settings to the
other cameras. Click "Apply" to save settings then click "OK" to exit.
Linkage Action:
Options available are full screen monitoring, enabling your
DVR's internal buzzer, send alerts to the SwannView Plus Windows software
(software must be running on your computer to receive alerts) and to send an
email. Click "Apply" to save settings then click "OK" to exit.
Sensitivity: This setting is controlled by a slider, allowing you to set a value
between L (low) and H (high). The closer to H the slider is set, the more sen-
Click for contents
12-09-2016 Fri 09:30:15
Click the checkbox to enable.
Camera 01
sitive it will be.
· Don't forget to click "Apply"
to save settings.
· Use the "Copy" function to
apply all settings to the other
cameras.
· Click the "Back" button to go
back to the Menu.
20