Hdd: General - Swann pro-series hd Instruction Manual

HDD: General

This function allows
you to initialize the hard
drive inside your DVR.
Initializing will erase any
data that is on there. You
also have the option of
adding a NAS (network
attached storage) device
that your DVR can use to
record to.
Add:
Create a folder on your NAS device to save to. Select "NAS", input the IP
address of your NAS device then click the "Search" button. If your NAS device
uses the iSCSI protocol select "IP SAN". Select the folder that you created
then click "OK" to continue.
Init: Click the checkbox to select the hard drive then click this button to for-
mat. A message will appear noting that all data will be erased.
Please note:
From time to time, we recommend that you format the
hard drive. This ensures that your DVR runs efficiently and maintains
system integrity. Connect a USB flash drive to copy events that you want to
save. Remember, formatting the hard drive erases all your recordings.
*If a new hard drive has been installed inside your DVR, you need to format
the drive before it can be used.
· Click the "Back" button to go back to the Menu.
Click for contents
69