Mutable Instruments ambika User Manual page 22

Ambika – User manual | Mutable Instruments
22 of 44
trig (trigger): LFO/envelope synchronization mode. free leaves the LFO free-running. env->lfo
resets the phase of the LFO everytime a new note is played. lfo->env retriggers the corresponding
envelope generator everytime the LFO completes a cycle.
attk (attack): Envelope attack time, from 1ms to 66s.
deca (decay): Envelope decay time (same times as for attack).
sust (sustain): Envelope sustain level.
rele (release): Envelope release time (same times as for attack).
Here is a list of LFO waveforms:
tri: Triangle.
sqr: Square.
s&h: Sample & hold (random value).
ramp: Ascending ramp (use a negative modulation amount in the modulation matrix to get a
descending ramp modulation).
sine to stp2: Wavetable LFOs. These LFOs are read from a wavetable containing many interesting
waveshapes.
Voice LFO (S3)
rate 24|wave
rate: LFO rate. The voice lfo cannot be synchronized to the tempo. The frequency ranges from 0.06
Hz (0) to 100 Hz (127).
wave (waveform): LFO waveform.
Modulation matrix and modifiers (S4)
Modul. 1|srce env1|dest prm1|amnt
http://mutable-instruments.net/ambika/manual
tri
0
2/17/17 4:58 PM