Mutable Instruments ambika User Manual page 4

Ambika – User manual | Mutable Instruments
4 of 44
The 2x40 characters LCD display D displays, most of the time, the name and values of the 8
synthesis parameters accessible by the 8 potentiometers P. The parameters are organized as two
rows of 4 parameters.
The clickable encoder E is used to scroll between parameters/pages, or to fine-tune the value of a
parameter.
The 8 LEDs L1...L8 indicate which page is active.
The 8 switches S1...S8 are used to display synthesis pages. For example, S1 shows the oscillators
and mixer page ; S2 shows the filter page, etc.
The part and voice LEDs LP1...LP6 indicate which part is active (green lights), and which voicecards
are currently playing notes (yellow lights).
The status LED LS is used to visualize the rate of a LFO or the beats in a sequence — depending on
which module you are editing.
http://mutable-instruments.net/ambika/manual
2/17/17 4:58 PM