Initial Utility Installation - Planet Networking & Communication ICA-4210P User Manual

2.3 Initial Utility Installation

This chapter shows how to quickly set up your IP camera. The camera is with the default
settings. However to help you find the networked camera quickly the windows utility PLANET
IP Wizard II can search the cameras in the network that can help you to configure some basic
setting before you started advanced management and monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the auto-run program. Once
completed, a welcome menu screen will appear.
2. Click the "IP Wizard II" hyperlink and a dialog box will appear as shown below:
If the welcome screen does not appear, click "Start" at the taskbar. Then,
select "Run" and type "D:\Utility\IPWizard II\setup.exe", assuming D is your
CD-ROM drive.
3. The "Welcome to the Install Shield Wizard for PLANET IP Wizard II" prompt will display on
the screen and click "Next" to continue.
60fps Full HD IR IP Camera with Remote Focus and Zoom
ICA-4210P