Appendix A: Ping Ip Address - Planet Networking & Communication ICA-4210P User Manual

Appendix A: Ping IP Address

The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP
address is accessible by sending a packet to the specific address and waiting for a reply. It's
also a very useful tool to confirm whether Internet Camera is installed or not, or if the IP
address conflicts with any other devices over the network.
If you want to make sure the IP address of Internet Camera, utilize the Ping command as
follows:
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the Internet Camera.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other device conflicting with the IP address of Internet Camera and
also can utilize the PING command, you must disconnect the Internet Camera from the
network first.
60fps Full HD IR IP Camera with Remote Focus and Zoom
ICA-4210P