Use Timer - Philips 24PFD4501/30 User Manual

[Auto Sleep]: Sets the duration the
•
TV may be idle before it automatically
switches off.
[Sleep Timer]: (Sleep Timer):
•
Sets the duration before the TV
automatically enters standby mode.
Options: Off/10/20/30/60/90/180
minutes.
[Power On Status]: Sets the TV's
•
status when it is connected to an AC
power supply.
[Time Setup]: Sets the system time.
•
[Color System]: Sets the AV color
•
system. (Only displayed in AV mode)
[HDMI]: Sets the HDMI mode. (Only
displayed in 480p/576p/720p/1080p
HDMI modes.)
[Reset]: Restores the default setup.
•
(Excluding password setup and channel
information)
[Soft blue]: Philips SoftBlue is a
•
revolutionary technology reducing the
intensity of the harmful spectrum of
the blue light from TV screens. (Note:
To adjust picture mode will cause
Softblue automatically set to "Off".)
[Reinstall TV]: Restore default setup
•
and go back to installation wizard
menu.
Changes the Picture Format
1
Press (Home), then select Setup
to enter the setup menu and select
[Settings].
2
Press
Format].
3
Select a picture format.
4
Press OK to confirm.
Summary of Picture Formats
The following picture settings can be configured.
Note
•
Depending on the format of the picture source,
some picture settings are not available.
12 EN-GB
to select [Picture
[16:9]: Change the normal
ratio to widescreen format.
[4:3]: The normal format.
[Zoom1]: Horizontal scaling
of the widescreen picture
format. When this format is
used, the two edges of the
picture frame will be partly
cut off.
[Zoom2]: Set the normal
ratio to widescreen format.
(Only 16:9, 4:3, and Point
to Point are available in PC
mode)
[Point to Point]: Used for
HDMI connections on PCs.
Will display the PC's full
screen in order to achieve
the best display effect.

Use timer

You can set the timer to switch the TV to
standby mode at a set time.
Tip
• Before using the timer, please set the sleep timer.
Setting the sleep timer
Tip
• You can turn the TV off earlier, or reset the sleep
timer before the TV switches off.
1
Press (Home), then select Setup
to enter the setup menu and select
[Settings].
2
Press to select [Sleep Timer].