Table of Contents
Advertisement
Watching channels from an external
device
Switching each input mode can easily switch with the remote
control between TV and external devices when they are
connected to the unit.
1
Turn on the set-top box or the connected device.
① Press S SOURCE and use H I to select the set-top box or
the connected device and wait a few seconds till the
picture appears.
Source Select
TV
AV
HDMI1
HDMI2
Multimedia
Move
② Use the remote control of the set-top box or the
connected device to select channels.
Back to Contents
Select
Back
Sleep timer
Sleep timer can set the unit to go into standby mode after an
incremental period of time.
Press SLEEP repeatedly to change the
amount of time (increases the time by 5
minutes up to 240 minutes).
Press SLEEP once to call up the display for checking the
remaining time.
To cancel sleep timer, press SLEEP Repeatedly until Off is
●
displayed.
Switching audio mode
Digital TV operation
1
Press SAP to display the currently selected language.
2
Press SAP repeatedly to cycle through the available audio
languages.
CC
CC
7.1
HD
720p Audio 1/3
KGO-HD
English
Note(s)
Available languages differ depending on the broadcast.
●
Other is displayed when the audio language cannot be acquired or the
●
acquired languages are other than English, French, or Spanish.
Cable/NTSC (Analog) TV operation
1
Press SAP to display the currently selected audio mode.
2
While receiving an MTS broadcast, press SAP repeatedly to cycle
through the available audio channels.
e.g.) When all audio modes are available
Stereo
Stereo : Outputs stereo audio
: Outputs mono audio
Mono
: Outputs a second audio program
SAP
17
5 min
THE VIEW FROM THE BAY
TV-G
Good
20XX/XX/XX XX:XX
French
Spanish
Mono
SAP
Continued on next page.
.
English
Advertisement
Table of Contents
