Installing Channels; Setting Up Channels Automatically; Updating Channels; Setting Channels Manually - Philips 24PFD4501/30 User Manual

6 Installing
Channels
The first time you set up your TV, you are
prompted to select a menu language and
to install TV channels. This section provides
instructions on how to re-install and fine-tune
channels.
Setting up channels
automatically
Automatically finds and saves channels.The
channel grid appears.
1
Press (Home) and select Setup to enter
the setup menu.
2
Press
[Channels] > [Channel Scan].
3
Press OK.
» The TV will automatically start
searching for channels.

Updating channels

1
Press (Home) and select Setup to enter
the setup menu.
2
Press
[Channels] > [Update Scan].
3
Press OK.
» The TV will start to update the
channels.

Setting channels manually

You can manually find and save analog TV
channels.
16 EN-GB
Select [TV] >
Select [TV] >
Finding and saving new TV
channels
1
Press (Home) and select Setup to enter
the setup menu.
2
Press to
[Channels] > [Manual Search] >
[Analog Manual Search].
» Show [Manual Search] menu.
3
Select [Start frequency (MHz) / End
Frequency (MHz)] and use the number
keys to enter the three-digit channel
frequencies.
4
Select [Start Search] and press OK.
5
Press (Home) Exit.
Swapping channels
1
Press (Home) and select Setup to enter
the setup menu.
2
Press
[Channels] > [Channel Edit].
» The [Channel Edit] menu will be
displayed.
3
Press Select the channel you wish to
swap, then press the red button.
4
Press Select the channel you wish to
swap, then press the red button to confirm.

Renaming channels

You can rename channels. Selecting a channel
will display its name.
1
Press (Home) and select Setup to enter
the setup menu.
2
Press
[Channels] > [Channel Edit].
Select [TV] >
Select [TV] >
Select [TV] >