Settings - Philips 24PFD4501/30 User Manual

• [Normal]: White tint. Users can
personalize the white tint in PC
mode.
• [Warm]: Reddish white tint.
[Advanced control]:
•
• [Noise Reduction]: Filters and
eliminates signal noise within the
image.
• [Backlight]: Adjusts the screen
brightness (when the backlight
brightness is set to a low value, a
momentary white flicker may be
visible when turning on the unit.
This is normal.
• [Dynamic Contrast]: Sets the
contrast to maximum. (There are
no advanced contrast functions in
PC mode.)
• [Dynamic Backlight]: The
contrast level will change with the
brightness of the image.
Note
•
The options may vary for different signal sources.
Adjusting the sound setup
1
Press (Home), then select Setup to
enter the setup menu and select [Sound].
» Displays [Sound] menu.
2
Press
setup:
[Smart Sound]:
•
• [Standard]: Gives balanced,
outstanding sound performance in
the treble, mid and bass ranges.
• [Music]: Enhances treble and
bass, delivering bright, clear and
pure sound quality when listening
to piano or orchestral instrument
performances.
• [Movie]: Enhance sound quality
of movies to enjoy a cinema-like
effects at home.
• [Speech]: Enhances the
performance of sound ranges
involved in the voice spectrum.
Select and adjust the
Suitable for watching news or arts
programs.
• [Flat]: Enhance the smoothness of
audio output for softer sound.
• [Personal]: Provides user
customization functions in order
to optimize all sound effect
parameters and achieve the best
experience.
[Balance]: Adjusts the balance of the
•
left and right speakers.
[Bass]: Adjusts the bass level
•
(adjustments made can only be saved
in personal setup).
[Treble]: Adjusts the treble level
•
(adjustments made can only be saved
in personal setup).
[Virtual surround]: Turns virtual
•
surround sound on:Turn on or off.
[AVL]: Turns automatic volume
•
adjustment on.
[SPDIF Mode]: Selects the SPDIF
•
output mode.

Settings

1
Press (Home), then select Setup
to enter the setup menu and select
[Settings].
» Displays [Settings] menu.
2
Press
setup:
[Menu language]: Changes the TV's
•
language setup.
[Picture Format]: The majority
•
of signals use 16:9, 4:3, Zoom 1 and
Zoom 2 formats; HDMI signal sources
use 16:9, 4:3, Point to Point, zoom
1 and zoom 2 formats;VGA signal
sources on PCs use 16:9, 4:3 and Point
to Point formats.
[Menu Timeout]: Sets the duration
•
for which the menu is displayed.
[Menu Transparency]: Sets the level
•
of transparency for the menu.
• [Blue Screen]: Sets the screen
color for when the TV is not receiving
a signal (when the TV signal is not
functioning).
Select and adjust the
EN-GB 11