Adjusting Vga Setup - Philips 24PFD4501/30 User Manual

3
Press , you can select a time for the
sleep timer to turn the TV off.
» The longest time that can be set for
the sleep timer is 180 minutes.
TV lock
By locking the TV remote control, you can
prohibit children from watching specific
programs or channels.
Setting or changing your
password
1
Press (Home), then select Setup
to enter the setup menu and select
[Parental].
2
Use the number buttons on the remote
control to enter a password.
3
Select [Change Password] and follow
the instructions on screen.
Locking channels
1
Press (Home), then select Setup
to enter the setup menu and select
[Parental].
2
Enter the password and select [Channel
Lock].
3
Choose a channel. Press OK to lock or
unlock the channel.
4
Repeat this step to lock or unlock multiple
channels.
• [Channel Lock]: When channels are
locked:
• You need to enter the four digit
password to enter the channel
blocking menu.
You need to enter the four digit
•
password to watch locked channels.
• You need to enter the four digit
password to enter the parental menu.
• [Clear All]: This function will clear all the
locked channels and signal sources that you
have previously saved.
The default password is "0000". Users
•
may change or set the password
themselves.
Note
• If you visit a locked channel, you will be
prompted to enter the password.

Adjusting VGA Setup

1
Press (Home), then select Setup to
enter the setup menu and select [VGA
setting].
» The [VGA setting] menu will be
displayed.
2
Press
setup:
[Auto adjust]: Automatically adjusts
•
the TV to synchronize its resolution
with that of the PC, so that programs
are displayed in full screen.
[H.Position]: Adjusts the horizontal
•
position.
[V.Position]: Adjusts the vertical
•
position.
• [Phase]: Adjusts the phase frequency
of the VGA signal.
• [Clock]: Adjusts the clock frequency
of the VGA signal.
Tip
• The VGA menu is only visible when connected
to a PC.
Select and adjust the
EN-GB 13