Using Philips EasyLink
Maximising the use of your Philips EasyLink
HDMI-CEC-compatible device can enhance
its control functions to the maximum level of
efficiency. HDMI-CEC-compliant devices that
are connected through HDMI connectors can
be controlled by the TV's remote control.
To enable Philips EasyLink, you'll need to:
Connect two or more HDMI-CEC
compatible devices through the HDMI
Confirm that every HDMI-CEC compatible
device is functioning properly.
Switch to EasyLink
The EasyLink-compliant device must be switched
on and selected as the source.
Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
HDMI 1, HDMI 2 and HDMI 3 have CEC
Enabling or disabling EasyLink
After enabling the HDMI-CEC-compliant device,
the TV will automatically turn on and switch to
the correct source.
Do not enable Philips EasyLink if you do not
intend to use it.
Select [Settings] > [EasyLink]>
Select [Off] or [On] and press OK.
Use One-touch Play
After enabling EasyLink, press play on your
" The TV will automatically switch to the
Use One-touch Standby
(Standby-On) on the remote
" The TV and all connected HDMI
devices will switch to standby.
Using a Kensington Security
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.