Magicspeed Installation - Waeco MagicSpeed MS900 Installation Manual

MagicSpeed installation

6 MagicSpeed installation
6.1 Tools required
For installation and assembly you will need the following tools:
Drill bit set (fig. 1 1, page 3)
Drill (fig. 1 2, page 3)
Screwdriver (fig. 1 3, page 3)
Set of ring or open-ended spanners (see fig. 1 4, page 3)
Set of box spanners (fig. 1 5, page 3)
Measuring ruler (fig. 1 6, page 3)
Hammer (fig. 1 7, page 3)
Centre punch (fig. 1 8, page 3)
To establish and test the electrical connection, the following tools are re-
quired:
Insulating tape (fig. 1 9, page 3)
Sealant
Cable bushing sleeves (optional)
To fasten the module and the cables, you may need additional screws and
cable binders.
26
MagicSpeed