Safety And Installation Instructions - Waeco MagicSpeed MS900 Installation Manual

MagicSpeed
This symbol describes the result of an action.
fig. 1 5, page 3: This refers to an element in an illustration. In this case,
"item 5 in figure 1 on page 3".
Please also observe the following safety instructions.
2

Safety and installation instructions

Please observe the prescribed safety instructions and stipulations
from the vehicle manufacturer and service workshops.
The manufacturer will not be held liable for claims for damage resulting from
the following:
Faulty assembly or connection
Damage to the product resulting from mechanical influences and excess
voltage
Alterations to the product without express permission from the manu-
facturer
Use for purposes other than those described in the operating manual
Caution
e
To prevent the risk of short circuits, always disconnect the negative
terminal of the vehicle's electrical system before working on it.
If the vehicle has an additional battery, its negative terminal should
also be disconnected.
Caution
e
Inadequate supply cable connections could result in short circuits,
causing:
– Cable fires
– The airbag being triggered
– Damage to electronic control equipment
– Electrical malfunctions (indicators, brake light, horn, ignition,
lights)
If you disconnect the negative terminal of the battery, all data stored in the
volatile memories will be lost.
Safety and installation instructions
23