EMAK 102 Operator's Manual page 121

PROBLEM
14. Unusual vibrations while working
15. Uncertain or ineffective braking
16. Erratic forward movement, poor drive when
going uphill or if the machine has a tendency to
rear up
17. With the engine running, the machine does not
move when the drive pedal is pressed
If problems continue after having carried out these operations, Contact your Dealer.
WARNING!
Do not take on complicated repair work if you don't have the necessary equipment and the technical
knowledge. The guarantee is automatically revoked and the manufacturer declines all responsibility for any repairs which
are badly done.
EN 38
LIKELY CAUSE
– the blades are imbalanced
– blades loose
– fixing bolts loose
– the brake is not adjusted correctly
– problems with the belt or the engagement device
– disengage lever in positon «B»
SOLUTION
– Contact your dealer
– Contact your dealer
– check and tighten all the fixing bolts of the
engine and frame
– Contact your dealer
– Contact your dealer
– put into position «A» ( 4.33)