How To Make And Interpret Srl Measurements; Select Srl As The Type Of Measurement - Agilent Technologies 8712ET User Manual
Option 100 fault location and structural
return loss measurements
rf network analyzers
Hide thumbs
Also See for 8712ET:
- Programmer's manual (320 pages) ,
- User's handbook supplement (158 pages)
Table of Contents
Advertisement
Making SRL Measurements
How to Make and Interpret SRL Measurements
How to Make and Interpret SRL
Measurements
A typical SRL measurement consists of the following steps:
1. Select SRL as the type of measurement.
2. Calibrate the analyzer.
3. Connect the equipment.
4. Determine the connector model.
5. Perform the SRL cable scan.
6. Interpret the SRL measurement.
The next few pages explain how to perform each of these steps.
1. Select SRL as the Type of Measurement
To select SRL mode, press
PRESET
BEGIN
Cable
SRL
.
NOTE
The SRL Cable Scan function operates over a frenquency range of 5 MHz
to 1000 MHz with 1601 measurement points. These values must be used
for all SRL measurements.
Option 100 Fault Location and SRL
4-3
- Quick Links:
- Calibrate the Analyzer
Hide quick links:
Advertisement
Table of Contents
