Spectrum Optio series Owner's Manual
  1. Manuals
  2. Brands
  3. Spectrum Manuals
  4. Indoor Furnishing
  5. Optio series
  6. Owner's manual

Spectrum Optio series Owner's Manual

Collaboration table
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual
Optio Collaboration Table
37132
Shown with eLift legs, casters,
and AV technology channel
Important
Before using this product:
• Read this manual
• Comply with all safety and operating instructions
• Ensure all parts and correct quantities are included
Any parts damaged during shipment must be reported
within 5 days of receipt. To report information regarding
missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
Thank you for purchasing Spectrum products!
Spectrum Industries, Inc
925 First Avenue, Chippewa Falls, WI 54729 USA
800 235 1262
715 723 6750
www.spectrumfurniture.com
™
Optio 60"L Table
Shown with T-legs
Optio 72"L Table
Optio 96"L Table
Shown with T-legs, and
cord channel
Optio 96"L Table
Shown with tapered worksurface,
eLift legs, casters,
and AV technology channel
0190236 Page 1 of 10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Optio series and is the answer not in the manual?

Questions and answers

Related Manuals for Spectrum Optio series

Summary of Contents for Spectrum Optio series

  • Page 1 5 days of receipt. To report information regarding missing parts or damage, to purchase parts or acces- sories, or if you have any questions, please contact us. Thank you for purchasing Spectrum products! Spectrum Industries, Inc 925 First Avenue, Chippewa Falls, WI 54729 USA...
  • Page 2 If servicing is unplug by pulling only on the cord. necessary, please contact Spectrum Industries for assistance. • Do not step on, drive over, drag, or place objects on power cords. • For added safety, plug into a grounded outlet controlled by a GFI (Ground Fault Interrupter) circuit breaker.

  • Page 3: Assembly & Set-Up

    Assembly / Setup 1. Remove worksurface from pallet Phillips screwdriver Note: The worksurface must be removed first from the pallet before the table base or tipping may occur. Cordless drill with Phillips driver (best) 1. Remove the screws securing the worksurface to the pallet blocking. 2.

  • Page 4: Install Worksurface

    3. Install worksurface Phillips screwdriver 1. Set the worksurface onto the base. Figure 3. 2. Align the mounting holes and secure with 1/4-20 x 5/8” PHM screws. (The screws will attach to the worksurface reinforcement bars). Cordless drill with Phillips driver (best) Worksurface Base...

  • Page 5: Display Stand

    5. Display Stand 1. If you have the optional display stand, proceed with the assembly instructions included with stand. Figure 5. Display stand Note: Requires mounting holes and cutout on flat end of worksurface. Note: The assembled Display Stand accommodates most 37”-70” monitors up to 125 lb.
  • Page 6 eLift operating instructions - eLift equipped tables only Phillips screwdriver 1. Attach the control button bracket under the radiused portion of the worksurface with (2) #8 x 5/8” PHSM screws and pre-drilled pilot holes in the center of the worksurface. 2.
  • Page 7 Accessories (Available separately after initial configured purchase) Display Stand - 37130 • Bolts directly to worksurface Slim VESA mount • Integrated wiring channel routes and hides wires Display stand • Slim VESA mount (non-tilting) • Adjustable (VESA-compatible) mount • Requires worksurface mounting holes and cutout Monitor size range: 37”-70”...

  • Page 8: Safety Information

    Electric actuator information Warning! Only for EU markets • This appliance can be used by children aged from 8 years and above and persons with Failure to comply with these instructions may result in accidents involving serious person- reduced physical, sensory or mental capabilities or lack of experience and knowledge if al injury.
  • Page 9 Misc. on the DESKLINE® DL5/DL6 system Electrical connection of the DL5/DL6 system This system is a DESKLINE system developed for desks and for indoor use in offi ces. Do The DESKLINE® DL5/DL6 system is to be connected as shown in Figure 4. Each DL5/ not use it in industrial kitchens or in other enviroments that have to be cleaned with ag- DL6 is to be connected to the sockets on the control box by means of the motor cables, gressive detergents.

  • Page 10: Warranty

    P.A.C.E. program (Product Assurance to meet Customer Expectations). We expressly warrant that Spectrum products will be of good quality and workmanship and free from defect for the period set out in the warranty table below from the date of delivery.

Table of Contents