Wireless
The Router also operates as a wireless access point, allowing wireless
computers to communicate with each other. To configure this function, all
you need to do is enable the wireless function, define the radio channel,
the domain identifier, and the security options. Click the Enable button to
activate the function.
•
Enable or disable Wireless function: select to enable or disable the
wireless function.
•
Secondary Wireless Module: check this box to enable the secondary
wireless module.
The Router supports two SSIDs - the primary and the secondary SSID.
If the wireless function is disable, both SSID will be disabled; if the
wireless function is enabled, then the primary SSID will be used by
default.
C
ONFIGURING THE
4-24
V
IP ADSL R
O
OUTER