Channel And Ssid - SMC Networks 7908A-ISP User Manual

Channel and SSID

You must specify a common radio channel and SSID (Service Set ID) to
be used by the Router and all of its wireless clients. Be sure you configure
all of its clients to the same values.
Parameter
Primary
Secondary
Wireless Mode
Channel
N
AVIGATING THE
Description
This is the primary Service Set ID. The SSID must be the
same on the Router and all of its wireless clients. Check the
Hide box to disable the broadcasting of this SSID.
This is the secondary SSID, only works if the Secondary
wireless module is enabled. Check the Hide box to disable
the broadcasting of this SSID.
This device supports both 11g and 11b wireless networks.
Make your selection depending on the type of wireless
network that you have.
The radio channel used by the wireless Router and its clients
to communicate with each other. This channel must be the
same on the Router and all of its wireless clients.
The Router will automatically assign itself a radio channel, or
you may select one manually.
4-25
M
ANAGEMENT
I
NTERFACE