Furuno NAVpilot-700 Installation Instructions Manual page 5
Hide thumbs
Also See for NAVpilot-700:
- Operator's manual (102 pages) ,
- Installation manual (100 pages) ,
- User manual (6 pages)
Advertisement
1.
Remove the outside cover of the processor unit; hold the right and left sides of the cover and
pull the cover outward.
2.
Remove the four screws circled below.
3.
Remove the cable clamp/fan assy. from the shield cover.
Note: When removing the cable clamp/fan assy., be careful not to apply tension to the fan
connector.
4.
Disconnect the fan connector.
Outside cover
Shield cover
Cable clamp/fan assy.
5
Disconnect
this connector.
Advertisement
