Furuno NAVpilot-700 Installation Instructions Manual page 10

5. OVRD Mode
When the EVC system controls the rudder, the OVRD (override) mode is automatically enabled.
The autopilot can not control the vessel in the OVRD mode.
The display examples in this section are shown for NAVpilot-700/711.
Note: The OVRD mode is enabled when [BOAT TYPE] is set to [EVCS BOAT].
OVRD mode activation in the STBY mode
When the OVRD mode activates in the STBY mode, [OVRD] appears at the top-left position of the
display. At this time only the [INSTALLATION] and user menus are operative. When the EVC sys-
tem releases control of the rudder, the autopilot goes to the STBY mode.
A
UTO
65
SETCSE
DEVIATION
20 10 5
OVRD mode activation in the AUTO or NAV mode
When the OVRD mode activates in the AUTO or NAV mode, the audio alarm sounds, the pop-up
[EVC OVERRIDE] appears, and the mode indication at the top-left position of the display shows
[OVRD]. Press any key to stop the alarm and erase the pop-up. When the EVC system releases
control of the rudder, the autopilot goes to the STBY mode.
A
UTO
65
HDG M
SETCSE
68.0
DEVIATION
3
20 10 5 5 10 20
HDG M
68.0
3
5 10 20
When the EVC system releases
control of the rudder.
A
UTO
65
SETCSE
DEVIATION
20 10 5
Press any key.
SETCSE
DEVIATION
20 10 5
HDG M
SETCSE
68.0
DEVIATION
3
5 10 20
When the EVC system releases
control of the rudder
10
65
HDG M
68.0
3
5 10 20
65
HDG M
68.0
3
20 10 5 5 10 20