Furuno NAVpilot-700 Installation Instructions Manual page 4

2.3 Wiring
Connect the cable assy. (MJ-A7SPF0005-020C) and gateway unit to the IPS interface unit as
shown below.
Ground wire
(IV-1.25sq.)
(MJ-A7SPF0005-020C, 2m)
Connection with the processor unit FAP-7002
Connect the cable assy. (MJ-A7SPF0005-020C) to TB1 (power) and TB7 (NMEA0183 port 2) of
the processor unit as shown in the procedure which follows.
Processor unit FAP-7002
IPS interface unit IF-700IPS
Cable Assy.
To processor unit FAP-7002
TB1
Cable entrance of the processor unit
4
Gateway unit
To the EVC system
Power
TB7
NMEA 0183 port 2