Verizon Jetpack - MiFi 7730L User Manual page 88

To select the applications you wish to allow:
➊
Mark the checkbox to the left of the application. The choices are Email (POP3, IMAP, SMTP),
FTP, HTTP, HTTPS, and Telnet.
➋
Click Add Custom Application to add a new custom application to the list of allowed
applications. You can define and turn on custom Port Filtering applications. You need to
know details of the traffic used and generated by the applications you wish to define.
NOTE
The Add Custom Application option is only available when port filtering is turned ON. You can
add up to ten custom applications.
The Custom Port Filtering page uses check boxes to turn on port filtering for custom
applications. Similar to the Applications list, you must turn on custom applications so they
can connect to the Internet.
➌
Enter the beginning of the range of port numbers used by outgoing traffic for the custom
application being added in the Start Port field.
➍
Enter the end of the range of port numbers in the End Port field. If the port is a single port
instead of a range, type the same value for both the Start Port and the End Port.
➎
Select the protocol (TCP, UDP, or both) used by each port range from the Protocol dropdown
menu.
➏
Click Save Changes to activate and save any changes made to the custom applications.
➐
Select the Delete checkbox next to any custom application you wish to delete and click Save
Changes.
Jetpack Settings Advanced - Port Filtering
83