Guest Network
The Guest Network section lists all devices connected to the Guest Wi-Fi. The Guest Network menu
contains the following options:
Change Max Wi-Fi Connections — Allows you to set how many devices can simultaneously
•
connect to the Jetpack's Wi-Fi network.
Type — The first column indicates the type of connected device. You can use the Edit option
•
to set or change the type. If the type has not been set, no icon is displayed. Once you set the
device type, an appropriate icon is displayed.
Name — Normally, this is the hostname of the connected device, as set on the connected
•
device. If you have used this interface to assign a name to a connected device, the assigned
name displays in place of the hostname. In rare cases, the hostname may be unavailable. You
can use the
Edit option — Allows you to change the name of any connected device.
•
Connection Type — Displays an icon to indicate the connection type for each connected
•
device.
IP Address — The IP address of the connected device.
•
Link-Local — If the connected device supports IPv6, the Link-Local IPv6 address is displayed.
•
MAC Address — The MAC Address is a unique network identifier for this connected device.
•
Block — Allows you to prevent a specific device from connecting to the Jetpack.
•
Blocked Devices
The Blocked Devices section lists any devices you have blocked. Note that since these devices
are not currently connected, and are blocked from connecting, they do not have an IP address.
Instead, they are identified by their name and MAC address. The Blocked Devices menu contains the
following menu options:
Unblock Button — Click Unblock to unblock a previously blocked device, freeing it to
•
connect again. The unblocked device is deleted from the Blocked Devices list, and will
reappear in the Connected Devices list when it connects.
52