Connected Devices
The Primary Network section lists all devices connected to the Wi-Fi Primary Network. The Primary
Network menu contains the following options:
Change Max Wi-Fi Connections — Allows you to set how many devices can simultaneously
•
connect to the Jetpack's Wi-Fi network.
Type — The first column indicates the type of connected device. You can use the Edit option
•
to set or change the type. If the type has not been set, no icon is displayed. Once you set the
device type, an appropriate icon is displayed.
Name — Normally, this is the hostname of the connected device, as set on the connected
•
device. If you have used this interface to assign a name to a connected device, the assigned
name displays in place of the hostname. In rare cases, the hostname may be unavailable. You
can use the
Edit option — Allows you to change the name of any connected device.
•
Connection Type — Displays an icon to indicate the connection type for each connected
•
device.
IP Address — The IP address of the connected device.
•
Link-Local — If the connected device supports IPv4, the Link-Local IPv4 address is displayed.
•
MAC Address — The MAC Address is a unique network identifier for this connected device.
•
Block — Allows you to prevent a specific device from connecting to the Jetpack.
•
Edit a Connected Device
To edit a connected device:
➊
Click the pencil tool. A page opens allowing you to edit a connected device.
Jetpack Connected Devices - Edit
49