Installing Memory Module; Heat Sink; Removing Heat Sink - Dell OptiPlex 7050 Micro Owner's Manual

b Remove the memory module from the socket on the system board [2].

Installing memory module

1 Align the notch on the memory module with the tab on the memory module connector.
2 Insert the memory module into the memory module socket and press it until it clicks into place.
3 Install the:
a system fan
b cover
4 Follow the procedure in

Heat sink

Removing heat sink

1 Follow the procedure in
2 Remove the:
a cover
b 2.5–inch drive assembly
c system fan
3 To remove the heat sink:
16 Removing and installing components
After working inside your computer.
Before working inside your computer.