Removing The 2.5-Inch Drive From The Drive Bracket; Installing The Drive Into The Drive Bracket - Dell OptiPlex 7050 Micro Owner's Manual

Removing the 2.5–inch drive from the drive bracket
1 Follow the procedure in
2 Remove the:
a cover
b 2.5–inch drive assembly
3 To remove the drive bracket:
a Pull one side of the drive bracket to disengage the pins on the bracket from the slots on the drive [1] and lift the drive [2].

Installing the drive into the drive bracket

1 Align and insert the pins on the drive bracket with the slots on one side of the drive.
2 Flex the other side of the drive bracket, and align and insert the pins on the bracket into the drive.
3 Install the:
a 2.5–inch drive assembly
b cover
4 Follow the procedure in
Before Working Inside Your
After working inside your computer.
Computer.
Removing and installing components 11