Maintenance
4.
When prompted to clean the scanner click on OK to proceed only if you have already cleaned
the scanner during preparation. Otherwise, follow the instructions on screen and clean the
scanner.
5.
Place the 3 sheets of plain white paper in the scanner's input tray and then click on OK.
6.
The scanner will pull the pages through as it sets the adjustment. This window will
automatically close when the initial adjustment is complete.
7.
Depending on your scanner model, you may be prompted to put 3 sheets of clean white
paper in the scanner. Place the pages in the scanner when prompted and then click on OK.
8.
Click on OK to complete the line reduction adjustment.
Restoring the Default Adjustment
You can reset the vertical line reduction adjustment to the factory default setting if completing an
adjustment does not improve the image quality.
1.
Open the scanner User Utility application.
User Guide
®
®
Xerox
DocuMate
5445/5460
53