Loading Documents to Scan
1.
Open the scanner.
2.
Locate the paper thickness switch in the underside of the ADF door.
3.
Pull the paper thickness switch up as indicated in the illustration below.
When you pull the paper thickness switch the double feed prevention roller disengages and
sits back into the scanner.
4.
Close the ADF door.
When you close the ADF door the double feed prevention roller will no longer touch the feed
roller.
5.
Place a single item in the input tray and scan.
When you are scanning thick items you cannot use the Double Feed Detection option in the
scanning interface. If you leave that option enabled the scanner will report a double feed error for
each page you scan.
When you are done scanning, do not forget to move the paper thickness switch back into its
original position so that you can proceed with normal document scanning.
User Guide
®
®
Xerox
DocuMate
5445 / 5460
29