Digital Projection INSIGHT 4K Dual LED & Quad Series
Control connections
LAN
RJ45 socket
RS232
9 way D-type connector
Pin
RS-232C
Functions as RS-232C
No.
Signal Name
1
Not connected.
2
RXD
Reception data
3
TXD
Transmission data
4
Not connected.
5
GND
Signal GND
6
Not connected.
7
Not connected.
8
Not connected.
9
Not connected.
3D Sync IN and 3D Sync OUT
75 ohm BNC
5V DC
Wired remote control
3.5mm mini jack
Tip
Power
Ring
Signal
Sleeve Ground
Reference Guide
APPENDIX D: WIRING DETAILS
Projector Connector Operation
Data transmission to an external device
Data reception from an external device
Signal GND
Update port
RS232:
pin view of female connector
pin view of female connector
Tip
Sleeve
Ring
pin view of female connector
Notes
Only one remote connection (RS232
or LAN) should be used at any one
time.
Plugging in the remote control cable
will disable the infra-red.
Rev B June 2016
page 63