Table of Contents
Advertisement
Digital Projection INSIGHT 4K Dual LED & Quad Series
4.
Mount the air filter to the projector.
Look for an arrow indicating the installation direction
on the side of the air filter. Point the arrow towards
the projector.
5.
Mount the front cover to the projector. Tighten the
two captive screws to secure the cover.
Installation and Quick-Start Guide
CLEANING AND REPLACING THE FILTERS, QUAD
Notes
The information on this
page refers to INSIGHT 4K Quad.
The arrow may appear different from
the illustration.
Before changing the filters,
always make sure the projector
is switched off and fully
disconnected from its power
supply.
When changing the filters, avoid
using excessive force as this may
damage the equipment.
Filters should be replaced when
new lamps are fitted, or as
necessary upon visual inspection
and in accordance with operating
environment.
Rev B June 2016
page 24
Advertisement
Table of Contents
