Table of Contents
Advertisement
Digital Projection INSIGHT 4K Dual LED & Quad Series
Keypad
POWER ON/OFF (with indicator)
1
FOCUS
2
Use with the arrow keys to adjust focus.
Press to enter FOCUS ADJUSTMENT mode, then press an
arrow key to focus the image.
To exit FOCUS ADJUSTMENT mode, press
seconds.
SHIFT
3
Use with the arrow keys to move the projected image.
Press to enter SHIFT ADJUSTMENT mode, then press an
arrow key to move the image.
To exit SHIFT ADJUSTMENT mode, press
seconds.
ZOOM
4
Use with the arrow keys to zoom the image in or out.
Press to enter ZOOM ADJUSTMENT mode, then press an
arrow key to zoom the image.
To exit ZOOM ADJUSTMENT mode, press
seconds.
Arrow keys
5
Use with
FOCUS
,
SHIFT
and
EXIT
6
Use to exit lens adjustment modes.
SHUTTER OPEN/CLOSE (with indicator)
7
RPY
8
Press, then press
to calibrate zoom.
RIGHT
Press, then press
LEFT
to calibrate focus.
INPUT +
9
Switches to the next available input source. Cycle through
the inputs in the following order:
...HDMI A, HDMI B, DisplayPort A, DisplayPort B...
INPUT –
10
Switches to the previous available input source. Cycle
through the inputs in the following order:
...DisplayPort B, DisplayPort A, HDMI B, HDMI A...
Installation and Quick-Start Guide
or wait 10
EXIT
1
2
EXIT
or wait 10
3
or wait 10
4
EXIT
ZOOM
to make adjustments.
5
6
PROJECTOR OVERVIEW
ON
OFF
POWER
OSD
OFF
ON
CTRL
FOCUS
AUTO
INFO
SHIFT
MENU
OK
EXIT
Keys that are not used in this
configuration are grayed out.
OPEN
When adjusting focus or zoom, UP
and LEFT will focus/zoom in, while
7
SHUTTER
DOWN and RIGHT will zoom out.
CLOSE
When adjusting shift, each arrow
key moves the image in the
corresponding direction on the
RPY
8
screen.
ZOOM
INPUT
9
+
When a new lens is fitted, a
calibration procedure must be
carried out. For more information,
–
see
Calibrating zoom and focus
further in this guide.
10
INPUT
Notes
Rev B June 2016
page 7
Advertisement
Table of Contents
